I had my clutch changed but I think the person who did it did it wrong so I wanna try to take it out an fix it myself but I need a step by step coz I'm not sure how to go about it any help will be appreciated thnxHow do I fix my clutch on my crx
FIRST REMOVE THE 2 BOLTS ON THE BOTTOM OF THE STRUT (EACH SIDE), THEN THE AXLE SHAFT BOLTS, USING A PRY BAR POP OUT THE SHAFTS FROM THE TRANSMISSION, THEN REMOVED THE STARTER AND UPPER BOLTS TO THE TRANSMISSION (THE ONES ACCESSIBLE FROM THE TOPSIDE. IF THE BOTTOM SUB-FRAME MUST BE REMOVED THEN YOU WILL NEED TO HOLD THE MOTOR UP WITH EITHER A ENGINE HOLDER OR A JACK-STAND UNDER THE ENGINE. THE REMOVE THE TRANSMISSION MOUNTS, BOTTOM BOLTS TO THE TRANSMISSION, AND IF AN AUTOMATIC FLYWHEEL RETAINING BOLTS, AFTER ALL RETAINING BOLTS FROM FLYWHEEL TRANSMISSION AND MOUNTS ARE REMOVED USE A PRY BAR AND ROCK THE TRANNY OUT, BE CAREFUL AND GET A JACK TO HELP LOWER IT OUT. TIPS: MAKE SURE CAR IS UP IN AIR AS HIGH AS POSSIBLE BEFORE PLACING JACK STAND, BECAUSE YOU CANT MOVE UP OR DOWN AT THIS POINT, ALSO THERE IS A HIDDEN 19MM BOLT ABOVE THE LOWER REAR MOUNT.
- YOU WILL NEED 10MM, 12MM, 14MM, 17MM, 19MM SOCKETS, COUPLE OF EXTENSIONS, PLIERS, AND SOME NEW COTTER KEYS FOR THE AXLE SHAFT BOLTS (AFTER INSTALLATION) IF YOU NEED MORE DETAIL ASK I DO THIS EVERYDAY.How do I fix my clutch on my crx
Email me i can send you an extremely detailed step by step, i just need to know the model and year. roysimmonsiv@yahoo.com
